Firstly, I don't know what kind of battery to use, and secondly I can't get the cover off of the battery compartment, is there a trick to this?

Duhhh, there's a battery in it but I still can't get it open. Pipe wrench? LOL

It's a CR2032 camera cell. If it's tight, use a tissue to grip the outer knurled cap. The cap is only about 1mm thick. Grip the adjustment knob tightly with the other hand, to keep from torquing it.

Scott

Send it back, I'll give you my mailing address and I'll forward it. Leave it on the rifle. May as well leave the ammo too.

Scott as long os were talking Batterys, what is the Minimum Voltage required to run it? I had a batt taht was holding at about 2,8 and the retical was not lighting up. but as soon as i put a new one in 3,1 it was back to being good. is this mine or all are that sensative.
thanks
riedog

Once those button cells drop below 3 volts, they're toast.

Unless you're reading the battery under a load, the 2.8 reading doesn't mean much. Just reading one with a DVM (digital volt meter) won't tell you if the battery is good or not...

Dan

I huffed and I puffed and I still can't get that damn cover off the battery compartment. I tried one of those rubber jar openers to no avail. I hope the battery lasts for a few years

Val and Scott will take care of it-- I wouldn't wait til the battery dies on it though. Just send it back now.

I mean I don't really care, but if it were me that's what I would do.

SR,

All I can say is they are on very TIGHT. There is an O-ring under the cap that seems to require a steady pressure before it lets go.

The method I used was a damp cloth to gain grip, then say a bad word followed rapidly by a very bad word. I'm thinking maybe in Romainian would be even better.

Now you have me wondering, as I have two more IOR's that have yet to need batteries. I will test them tonight and if I learn a better way, I'll holla.

LJP

I don't think it's an issue that requires returning it. I just need a tool that won't damage the cap, a small strap wrench maybe.

I'd call before you try it-- it maybe cross threaded. In which case let Val break it.

Hey SR,

I was going to mention a tool but thought there maybe some objection to it. First do not use a strap wrench, all of the strap tensioning force is applied via pressure at the foot of the wrench and will definately dent the cap.

There is a set of pliers that I know will work without scratches or pressure points, but they are sometimes hard to find. They are called "pipe pliers", not a pipe wrench. they work so well on round objects that you do not squeeze them, only hold them in place and they seem to create their own grip. The pliers have for the upper jaw a rounded, almost "V" shape, while the bottom jaw is like a curved foot.

If you place a cloth over the outer knob and use these it will definately come loose and if you do not apply a much squeeze there won't be any marks or crush. I've used mine on some very fragile items and never had a problem, but I have a difficult time advocating using metal tools on a fine instrument. I was heading for the pliers on mine when I guess I said the right curse word.

LJP

The problem is when I use something to give me leverage on the outer part of the knob I lose grip on the inner part, I need to put equal leverage on both parts of the knob which is tough.

S-R,

If you would like, send the scope to me and I'll give it a whirl. I'll assume responsibility for damage, and i'll pay shipping both ways, or replace your scope.

Any legitimate problem which results in less happiness on the part of the customer with a product I sell becomes my problem. I'm sorry for the inconvenience.

Scott

No need for an apology, there has to be an easy way. I'm just surprised it's on so tight. It sits on the knob evenly so I don't think it's crossthreaded.

Now you can't get a better deal than that.

Scott:

So if we needed replacements can we get them through you?

Hunter,

Replacement scopes or knobs?

Scott

Batteries Scott.... We know you can get scopes and knobs. LOL

I got it!! that dirty little... I used a pair of pliers with leather over the cover, no damage done. I seriously don't think that cover would have come off any other way. Thanks for the offer Scott.

If you want me to send you CR2032 cells just say the word, and I will get them to you.





Hey, S-R, you are my guys, I'm here to cover your sixes !!! The sale isn't done until the scope is satisfactory!

Scott

[/quote]

If you want me to send you CR2032 cells just say the word, and I will get them to you.




Scott:

Just wanted to know for future referance. Havnt used any of the batteries as of yet. Give it time. LOL
I cant wait to start running them down on my new 6-24 or my 3-18.

Hunter:
The CR2032's aren't rare, and last a long time unless you leave the reticle on accidentally. You can find them at any Radio Shack. I doubt you will run yours down before you are back in-country
Cheers,
--Hawk

I dont know, the way the neigbors like to look through my new toys they may be a little dimmer than they should be by the time i return. Everyone I tell to go and take a look at my new scopes say that they are the Sh**. Again, thanks Scott.