Announcement

Collapse
No announcement yet.

What ring height do I need for my rifle?

Collapse
This is a sticky topic.
X
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • What ring height do I need for my rifle?

    What ring height for my rifle?

    1. Measure the base height from the top of the action to the top of the base.
    2. Know the rings center point (example: Badger Medium +0.885, Standard +0.823) and add this distance to the first measurement.
    3. Now, measure the bell (just because it says its a 42mm bell does not mean the outside is a 42mm), divide it in half and add 0.125 for the scope cap.
    4. Subtract this distance calculated in steps 1 and 2 from the distance calculated in step 3. This will tell you where the bottom of the scope bell will be. This will help give you an idea of what ring to choose. You can go further. For example, lets say we came up with 0.15.
    5. Now placing a flat ruler on the action, figure out where you would like the scope bell to be.
    6. Measure down from the under side of the ruler to the top of the barrel. Lets say this number is 0.25. You will take the 0.25 and subtract the 0.15 to give you a 0.1 clearance. Now you know the rifle, scope, and rings will work as long as it is (+ number).

    I hope this helps!


    Mike @ CSGW

    www.csgunworks.com
    mike@csgunworks.com

    Heres some testimonials about CS GunWorks
    What do YOU have to say about CS GunWorks
    What Do You Think Of Cs Gunworks?
    FEEDBACK about CSGUNWORKS.com
    CSTACTICAL.COM
    "The Straight Shooter of the Industry"
    916-670-1103
    Click Here To Join our Facebook Fan Page
Working...
X